|
|
 |
 |
|
|
| DCJK-3301 |
| Watertight switch according to IP67. |
|
|
 |
|
|
| NM13-0001 |
| Full load switch for the throttle valve. |
|
|
 |
|
|
| DR1P-AG01 |
| Used as final position switch on throttle valves. Dust protected with higher life expectation and a temperature range up to 140°C. |
|
|
 |
|
|
| DCJK-51VA |
| Watertight switch according to IP67 with auxiliary actuator for the use in wipersystem-motors. |
|
|
 |
|
|
| DCJK-5208 |
Watertight switch approved to IP 67 with customer-specific auxiliary actuator and fixation pillars. Used for the activation of the electronic steering-column locking.
|
|
|
 |
|
|
| DC3C-SGAA |
| Watertight silicon-free switch (IP67) for brake applications, fulfills durability and tightness requirements specific to the application. |
|
|
 |
|
|
| DB3C-DGAJ |
To detect final position of the sunroof. Dust proof according to IP40 with lateral PCB connections.
|
|
|
 |
|
|
| DCJK-5306 |
| Watertight switch (IP67) with customer specific add-on parts for the control of the final position of the convertible top. The harness is sealed. Various connection options available. |
|
|
 |
|
|
| DC3B-BGAE |
| Watertight switch (IP67) with customer specific add-on parts to control of the final position of the convertible top. The harness is sealed. Various connection options available. |
|
|
 |
|
|
| DR1P-BNA0 |
Limit switch for the convertible top lock which controls the window-lift via operating the door handle. Dust-proof switch (IP40) with secure actuation through mushroom actuator. The switch is available with and without fastening pins.
|
|
|
 |
|
|
| ZD499-VGAB |
| Standard switch D4 with auxiliary roller actuator to control for example the final position of car seats. The switch meets several OEM customer specific standards. |
|
|
 |
|
|
| DB2B-BGAA |
| Switch used for headlight cleaning equipment. Switching motor and signal currents with high repeat accuracy and extreme life expectations. Very high resistance against environmental conditions. Customer specific solder terminals. |
|
|
 |
|
|
| DB2C-AGAC |
| Switch used for headlight cleaning equipment. Switching motor and signal currents with high repeat accuracy and extreme life expectations. Very high resistance against environmental conditions. Customer specific solder terminals. |
|
|
 |
|
|
| DCJK-5102 |
| Watertight switch according to IP67 monitoring the change-over blocking of automatic transmissions. |
|
|
 |
|
|
| NM13-0041 |
| Micro switch of the DK series, mounted and potted on a fixation clip to monitor the front hood-latch. |
|
|
 |
|
|
| DK1F-PG06 |
| Watertight micro-switch from the DK-series with simulated roller actuator and fixation pillars to monitor the front-flap lock. Various harness variants are available. |
|
|
 |
|
|
| DK1F-PG01 |
| Application in the front-flap lock of the electronic anti-theft system. The watertight (IP67) sub-miniature snap switch with ice protected additional actuators meets various OEM customer specific demands. The switch has a cable with a flexible hose and can be equipped with different carrier variations to the harness. |
|
|
 |
|
|
| DK1E-HG01 |
| Application with the lock key cylinder for the central locking control in the trunk lock. The central locking functions open/close or as a control signal for the electronic theft protection system. The sub-subminiature snap switch DK with ice protected auxiliary actuator is watertight (IP67) and meets various OEM customer specific demands. Different connector options are available for the the harness. |
|
|
 |
|
|
| DC3E-BGAS |
Control of the trunk lock key cylinder for the central locking (function: open/close) and as signal switch for the theft protection system. The switch is watertight (IP67), carries customer specific built-in parts and a soldered and sealed harness. Several different connector options are available.
|
|
|
 |
|
|
| DK1E-KG01 |
Used in the trunk lock key cylinder for the control of the central locking in the lock key or the electronic theft protection system.The watertight (IP67) sub-miniature snap switch DK with ice protected additional actuators meets various OEM customer specific demands. Different connector options are available for the the harness.
|
|
|
 |
|
|
| NM09-0023 |
| Switch for key cylinder heating in the passenger doors. The watertight switch (IP67) with ice protected auxiliary actuator made of spring steel is mounted above the door-handle. It meets several OEM customer specifications. |
|
|
 |
|
|
| NM09-0001_0002 |
Application in the door lock for the central locking function (open/close). The switch is watertight (IP67) and has an ice protected lever made of spring steel. It meets several OEM customer specifications and has several connector options.
|
|
|
|
|
| Search |
|
Please enter a search term.
|
|
|
| We will give you a call! |
|
|
|
|
| CHERRY Automotive Skills |
|
|
|
|
|
