Geartooth Speed

Sensors

Check Distributor Stock

	FLANGE MOUNT GEAR SENSOR RATED TO 150° C

Features

Capable of operating up to 150ºC
Sealed design exceeds IEC60529 IP67 standard for immersion
Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems
Easily customizable connector orientation
ESD resistant to 15kV (contact discharge)
Operates at arbitrarily low speeds
Mating connector Delphi 12162280

applications

GS101205 Series

Download Detailed Specs

SPECIFICATIONS

Electrical

Operating Voltage Range:	5–30 VDC

Supply Current:	6 mA max

Output Saturation Voltage:	600 mV max

Output Current:	25 mA max

Operating Temperature:	-40° to 150ºC*

Storage Temperature Range:	-55° to 150ºC

Output Risetime:	10µS

Output Falltime:	10µS

Bulk Current Injection:	SAE J1113-4 (250klHz to 500MHz; 100mA/m)

Conduction and Coupling:	SAE J1113-12 (±200V)

Electronic Discharge:	SAE J1113-13 (±15kV)

Radiated Immunity:	SAE J1113-21 (10kHz to 18GHz; 200 V/m)

Immunity to Magnetic Fields:	SAE J1113-22 (600microT AC Field; 5Hz to 2kHz; .2mT & 1mT DC Field)

Radiated Emissions:	SAE J1113-23

Immunity to AC Fields:	SAE J1113-25 (15kV/m)

Radiated Emissions:	SAE J1113-41 (Class 4)

Maximum Speed:	10kHz (with Cherry target)

*For continuous operation at 150°C supply voltage should be limited to 5.5V max.
Mechanical

Airgap:	1.5 mm (with Cherry test gear)

Max Installation Torque:	50 in-lbs (for a 1/4 - 20 bolt or M6 X 1)
Environmental

Water Immersion:	IEC60529 IP67

Dust, Sand and Gravel Bombardment:	SAE J400 JUN80

Vibration:	Sinusoidal vibration max 15g’s from 40 to 2000 Hz

Mechanical Shock:	18 shocks at 50g’s 11ms per Mil Std 202F

Dimensions

(mm)

Click on image to enlarge

RECOMMENDED EXTERNAL PULL-UP RESISTOR

Volts (DC)	5	9	12	15
Ohms	1000	1800	2400	3000

OPEN COLLECTOR SINKING BLOCK DIAGRAM

For best results, we recommend targets made from low carbon cold rolled steel. Other factors that influence sensor performance include geartooth height and width, space between teeth, shape of the teeth and thickness of the target. As a general guideline, consider a target with the following minimum parameters:

Tooth Height	Tooth Width	Distance Between Teeth	Target Thickness



.200"	.100"	.400"	.250"

Specifications subject to change without notice.