• Choice of Momentary, Push-Pull (reset) and Cheat Interlock switches
• Snap-in panel mounting
• Long-life coil spring, snap-action mechanism
• Agency approved extended-life versions available
• VDE approval available on select models (F Series)

Click for Larger View
 

Switch prefix for VDE approved switches must be “F”. Example: E68-30A becomes F68-30A.

Standard terminals for VDE applications are
0.187" x 0.032" (4.75mm x 0.81mm)

Inches (mm)

Click for Larger View
 

Standard terminals for this switch series are:
0.187" x 0.020" (4.75mm x 0.51mm) for up to 10 amps, and
0.250" x 0.032" (6.35mm x 0.81mm) for 16 amps.

Standard terminals for VDE applications are
0.187" x 0.032" (4.75mm x 0.81mm).

Consult factory for non-standard terminal options.

”A” dimension = full overtravel position (see table below)

–50A has actuator with special shaft to accept auxiliary push buttons for manual actuation.

Click for Larger View
 

Double throw (SPDT) and single throw normally opened or normally closed (SPST NO and SPST NC) versions are available.

To order SPDT, use "0" before the final "A" in part number.
For SPST NO, use "1"; for SPST NC use "2".

Example:
E68–30A = SPDT
E68–31A = SPST NO
E68–32A = SPST NC
 

Select the current rating you need.
Combine the corresponding Series/Prefix number with the appropriate suffix number
for the actuator type and circuitry you require.
(Switch prefix for VDE approved switches must be “F”)

Example:
E65–00A = 16A, with basic momentary action actuator, SPDT
E68–21A = 0.1A, with push-pull (reset) actuator, SPST NO
F69–32A = 10A, VDE approved/International version, with dual action actuator, SPST NC